QAM  modulatin technics for advance comm.

The 3rd Generation Partnership Project (3GPP) is the standards organization that is responsible for the evolutionary planning of the 3GPP family of technologies. 3GPP creates specifications for wireless cellular technologies through working groups comprised of operators and vendors to further the development and standardization for successful global deployments of the 3GPP family of technologies and labels the final stages of development as “Releases.” 3GPP uses a system of parallel Releases to provide developers with a stable platform for implementation and to allow for the addition of new features required by the market.

Source: Transition to 4G: 3GPP Broadband Evolution to IMT-Advanced

From the 4th LTE North America Conference, 8 - 9 November 2011, Dallas, Texas, USA
Presented by Joe Lawrence, Vice President, CDMA Development Group (CDG)

Huawei is building the networks and the devices to enable the future of communications. We strive to democratize 3G and to provide solutions across all mobile standards and frequencies. We have market penetration in over 115 countries and regions and we cooperate with over 235 ooperators around the world in providing end-to-end flexible networking design. With Huawei, with 3G.

Ericsson IMS Demo 

When LTE is an overlay to a CDMA/EV-DO network, the current de facto standard for voice delivery is Simultaneous Voice and LTE (SVLTE). In this arrangement, voice service is deployed as a 1x service running in parallel with LTE data services. For this solution to work, the handset needs to have two radios that are on simultaneously. The problem that is obvious is that the power consumption would generally be higher as two radios are on when the voice call is ongoing. The advantage (and I think its a big advantage) is that the data speeds are not affected by ongoing voice call and at the same time the state machine is simple.



For some reason this idea is not very popular for the 2G/3G evolution to LTE as the reliance will be on the CS Fallback. I had discussed this idea in the LTE World Summit and had blogged about it.

Extracted from 3GPP 36.300:


The eNB hosts the following functions: 
- Functions for Radio Resource Management: Radio Bearer Control, Radio Admission Control, Connection Mobility Control, Dynamic allocation of resources to UEs in both uplink and downlink (scheduling);
- IP header compression and encryption of user data stream;
- Selection of an MME at UE attachment when no routing to an MME can be determined from the information provided by the UE;
- Routing of User Plane data towards Serving Gateway;
- Scheduling and transmission of paging messages (originated from the MME);
- Scheduling and transmission of broadcast information (originated from the MME or O&M);
- Measurement and measurement reporting configuration for mobility and scheduling;
- Scheduling and transmission of PWS (which includes ETWS and CMAS) messages (originated from the MME);
- CSG handling;
- Transport level packet marking in the uplink.


DeNB hosts the following functions in addition to the eNB functions:
- S1/X2 proxy functionality for supporting RNs;
- S11 termination and S-GW/P-GW functionality for supporting RNs.


E-UTRAN supports relaying by having a Relay Node (RN) wirelessly connect to an eNB serving the RN, called Donor eNB (DeNB), via a modified version of the E-UTRA radio interface, the modified version being called the Un interface. The RN supports the eNB functionality meaning it terminates the radio protocols of the E-UTRA radio interface, and the S1 and X2 interfaces. From a specification point of view, functionality defined for eNBs, e.g. RNL and TNL, also applies to RNs unless explicitly specified. RNs do not support NNSF. In addition to the eNB functionality, the RN also supports a subset of the UE functionality, e.g. physical layer, layer-2, RRC, and NAS functionality, in order to wirelessly connect to the DeNB.


The architecture for supporting RNs is shown in Figure 4.7.2-1. The RN terminates the S1, X2 and Un interfaces. The DeNB provides S1 and X2 proxy functionality between the RN and other network nodes (other eNBs, MMEs and S GWs). The S1 and X2 proxy functionality includes passing UE-dedicated S1 and X2 signalling messages as well as GTP data packets between the S1 and X2 interfaces associated with the RN and the S1 and X2 interfaces associated with other network nodes. Due to the proxy functionality, the DeNB appears as an MME (for S1-MME), an eNB (for X2) and an S-GW (for S1-U) to the RN. 


For more details see - 3GPP TS 36.300 : Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2 (Release 10)